Mappings from STIX 1.x to STIX 2.0¶
This section outlines the disposition of each property of the top-level objects when converted.
For each STIX 1.x object that was converted the following options are possible:
- STIX 1.x property mapped directly to a STIX 2.0 property. This property’s value is used unaltered in the conversion to 2.0.
- STIX 1.x property translated into STIX 2.0 property. This property’s value must undergo some minor processing to determine the corresponding content for 2.0.
- STIX 1.x property mapped using STIX 2.0 relationships. This property is used to construct a 2.0 relationship object. The “reverse” notation indicates the the STIX 1.x property is found on target object.
- STIX 1.x property recorded in the STIX 2.0 description property. This property has no corresponding property in STIX 2.0, but its value can be (optionally) included in the description property of the 2.0 object as text.
- STIX 1.x property not mapped. This property will not be included in the converted 2.0 object.
Top Level Object Mappings¶
This table describes the mapping between STIX 1.0 and STIX 2.0 top-level objects. Notice that certain object types in STIX 1.x that were not top-level objects are in STIX 2.0 (e.g., Malware).
STIX 1.x object | STIX 2.0 object |
---|---|
Campaign |
campaign |
Course_Of_Action |
course-of-action |
et:Vulnerability |
vulnerability |
et:Weakness |
not converted |
et:Configuration |
not converted |
Incident |
not converted |
Indicator |
indicator |
Report |
report |
Observable |
observed-data |
Package |
bundle |
Threat Actor |
threat-actor |
ttp:Attack_Pattern |
attack-pattern |
ttp:Infrastructure |
not converted |
ttp:Malware |
malware |
ttp:Persona |
not converted |
ttp:Tool |
tool |
ttp:Victim_Targeting |
identity |
Common Properties¶
STIX 1.x Properties Mapped Directly to STIX 2.0 Properties
STIX 1.x property | STIX 2.0 property |
---|---|
Description |
description |
timestamp |
modified |
Title |
name |
In STIX 1.x only one timestamp is recorded, whereas in STIX 2.0, there are two properties: created
and modified
. The created
timestamp
is not stored in objects in STIX 1.x. The timestamp
property in STIX 1.x holds the modified
timestamp.
STIX 1.x Properties Translated to STIX 2.0 Properties
STIX 1.x property | STIX 2.0 property |
---|---|
id |
id |
Handling |
object_markings_refs, granular_markings |
Information_Source |
created_by_ref , external_references |
Type |
labels |
In STIX 1.x, an id
contained a “namespace”. This was deemed unnecessary in STIX 2.0, therefore they contain no origin information.
Handling
Data Markings, called Handling in STIX 1.x, have been completely redesigned for STIX 2.0. STIX 1.x used xpath, which was a reasonable choice given its reliance on XML for implementation. However, the use of xpath was very difficult to implement, and was more expressive than was deemed necessary.
STIX 2.0 introduces two new concepts, object markings and granular markings, which simplify the marking of data. Object markings apply to a whole object, whereas granular markings are specific to particular properties of an object. The selection of which properties are to be marked is expressed in a serialization-neutral way. The scope of marking definitions is at the object level. There is no marking that can apply to a whole bundle, or report.
Information_Source
In STIX 1.x there were several related concepts that were used to identify the sources of information and various parties of interest. Parties of interest are creators of content, victim targets, and other responsible parties. Sources of information could be an individual, organization or some software application. Additionally, it was possible to make references to source material external to STIX, e.g., a citation, URL, or an ID in an external system or repository.
In STIX 2.0, we have retained the concept of an
IdentityType
object, but do not rely on the OASIS CIQ standard model as STIX 1.x did. TheIdentity
object type in STIX 2.0 contains a very streamlined set of properties:identity_class
to specify if it is an individual or organization,sectors
to indicate the industry sector that the identity belongs to, and a free text property,contact_information
to specify such information. All other STIX 1.x propeties are not mapped in the conversion.The
InformationSourceType
object was used in STIX 1.x to associate an object with its creator’s identity. In STIX 2.0, the common propertycreated_by_ref
is used, and it must contain the identifier of anIdentity
object.The
InformationSourceType
object was also used in STIX 1.x to specify external information. Other properties likecapec_id
ofAttackPatternType
, orcwe_id
ofVulnerabilityType
were also used for external information, holding the ids of items in repositories or systems external to STIX. In STIX 2.0, the data typeexternal-reference
is used for all external information.Type
In STIX 2.0, the type of an object is defined to be a specific literal, and is recorded in the
type
property. The type of an object in STIX 1.x was either implicitly defined by its element name or explicitly using xsi:type.Kill Chains
In STIX 1.x, kill chains, with their phases, were defined using the
KillChainType
, which is found in theKill_Chains
property of aTTP
. These kill chains phases were refered to in theTTP
andIndicator
Kill_Chain_Phases
properties. In STIX 2.0, kill chains and their phases are not explicitly defined, but are referenced using their common names. If the Lockheed Martin Cyber Kill Chain™ is used thekill_chain_name
property must belockheed-martin-cyber-kill-chain
, according to the specification.
STIX 1.x Properties Mapped Using STIX 2.0 Relationships
none
STIX 1.x Properties Recorded in the STIX 2.0 Description Property
Short_Description
Confidence
The confidence concept is not present in STIX 2.0. However, the property name confidence has been reserved for future STIX versions.
STIX 1.x Properties Not Mapped
idref
Relationships in STIX 2.0 make use of id references to indicate the source and target of the relationship. STIX 2.0 objects additionally use
id
references for any property whose suffix isref
or``refs``. The decision available in STIX 1.x to specify related objects by embedding them is not available in STIX 2.0.Related_Packages
STIX 1.x packages correspond to STIX 2.0 bundles. However, bundles cannot refer to other bundles, so there is no way to express this property in STIX 2.0.
Version
Individual STIX objects do not have their own STIX version in STIX 2.0. A bundle has the property
spec_version
, which applies to all objects that are contained in the bundle.
Versioning¶
STIX 1.x supported the versioning of objects, but it was a feature that was rarely used. STIX 2.0 support of
versioning is based on two common properties: modified
and revoked
. However, the elevator does not support
converting STIX 1.x versioned objects, in the unlikely inclusion of such objects.
All converted objects will be assumed to be the one and only version of an object. If more than one object is found with the same id, it will not be flagged as an error.
Relationships¶
All STIX 1.x relationships were defined explicitly in the specification and they are all embedded as properties of the object. In STIX 2.0, relationships are top-level objects so they exist independently from their source and target objects. Additionally, although the STIX 2.0 specification suggests certain relationships between object types, a relationship between any two objects is allowed.
Relationships in STIX 1.x could be specified either using the idref
property,
or by embedding the object within the relationship itself. In the former case,
the STIX 2.0 object should use the original object’s id
as the source_ref
property,
and the idref
as the target_ref
property.
In the latter case, the embedded object must first be converted to a top-level STIX 2.0 object.
Of course, the embedded object’s id
might not present. In that case, an new id must be created.
An Example
STIX 1.x in XML
<stix:Campaign id="example:Campaign-e5268b6e-4931-42f1-b379-87f48eb41b1e"
timestamp="2014-08-08T15:50:10.983728+00:00"
xsi:type='campaign:CampaignType' version="1.2">
<campaign:Attribution>
<campaign:Attributed_Threat_Actor>
<stixCommon:Threat_Actor idref="example:threatactor-56f3f0db-b5d5-431c-ae56-c18f02caf500"/>
</campaign:Attributed_Threat_Actor>
</campaign:Attribution>
</stix:Campaign>
STIX 2.0 in JSON
{
"created": "2014-08-08T15:50:10.983Z",
"id": "relationship--3dcf59c3-30e3-4aa5-9c05-2cbffcee5922",
"modified": "2014-08-08T15:50:10.983Z",
"relationship_type": "attributed-to",
"source_ref": "campaign--e5268b6e-4931-42f1-b379-87f48eb41b1e",
"target_ref": "threat-actor--56f3f0db-b5d5-431c-ae56-c18f02caf500",
"type": "relationship"
}
{
"id": "campaign--e5268b6e-4931-42f1-b379-87f48eb41b1e"
}
{
"id": "threat-actor--56f3f0db-b5d5-431c-ae56-c18f02caf500"
}
Attack Pattern¶
STIX 1.x Properties Mapped Directly to STIX 2.0 Properties
none
STIX 1.x Properties Translated to STIX 2.0 Properties
STIX 1.x property | STIX 2.0 property |
---|---|
capec_id |
external_references |
ttp:Kill_Chain_Phases |
kill_chain_phases |
STIX 1.x Properties Mapped Using STIX 2.0 Relationships
STIX 1.x property | STIX 2.0 relationship type |
---|---|
ttp:Victim_Targeting |
targets |
ttp:Exploit_Targets |
targets (vulnerability, only) |
ttp:Related_TTPs |
uses (malware, tool), related-to (when not used for versioning) |
STIX 1.x Properties Recorded in the STIX 2.0 Description Property
ttp:Intended_Effect
STIX 1.x Properties Not Mapped
ttp:Kill_Chains
An Example
STIX 1.x in XML
<stix:TTP id="example:ttp-8ac90ff3-ecf8-4835-95b8-6aea6a623df5" xsi:type='ttp:TTPType'>
<ttp:Title>Phishing</ttp:Title>
<ttp:Behavior>
<ttp:Attack_Patterns>
<ttp:Attack_Pattern capec_id="CAPEC-98">
<ttp:Description>Phishing</ttp:Description>
</ttp:Attack_Pattern>
</ttp:Attack_Patterns>
</ttp:Behavior>
<ttp:Information_Source>
<stixCommon:Identity idref="example:identity-f690c992-8e7d-4b9a-9303-3312616c0220"/>
</ttp:Information_Source>
</stix:TTP>
STIX 2.0 in JSON
{
"created": "2017-01-27T13:49:54.326Z",
"created_by_ref": "identity--f690c992-8e7d-4b9a-9303-3312616c0220"
"description": "Phishing",
"external_references": [
{
"external_id": "CAPEC-98",
"source_name": "capec"
}
],
"id": "attack-pattern--8ac90ff3-ecf8-4835-95b8-6aea6a623df5",
"modified": "2017-01-27T13:49:54.326Z",
"name": "Phishing",
"type": "attack-pattern"
}
Campaigns¶
STIX 1.x Properties Mapped Directly to STIX 2.0 Properties
STIX 1.x property | STIX 2.0 property |
---|---|
Names |
aliases |
STIX 1.x Properties Translated to STIX 2.0 Properties
STIX 1.x property | STIX 2.0 property |
---|---|
Intended_Effect |
objective |
STIX 1.x Properties Mapped Using STIX 2.0 Relationships
STIX 1.x property | STIX 2.0 relationship type |
---|---|
Related_TTPs |
uses |
Related_Campaign |
indicates (reverse) |
Attribution |
attributed-to |
Associated_Campaigns |
related-to (when not used for versioning) |
STIX 1.x Properties Recorded in the STIX 2.0 Description Property
Status
STIX 1.x Properties Not Mapped
Activity
Related_Incidents
An Example
STIX 1.x in XML
<stix:Campaign id="example:Campaign-e5268b6e-4931-42f1-b379-87f48eb41b1e"
timestamp="2014-08-08T15:50:10.983"
xsi:type='campaign:CampaignType' version="1.2">
<campaign:Title>Operation Bran Flakes</campaign:Title>
<campaign:Description>A concerted effort to insert false information into the BPP's web pages</campaign:Description>
<campaign:Names>
<campaign:Name>OBF</campaign:Name>
</campaign:Names>
<campaign:Intended_Effect>Hack www.bpp.bn</campaign:Intended_Effect>
<campaign:Related_TTPs>
<campaign:Related_TTP>
<stixCommon:TTP id="example:ttp-2d1c6ab3-5e4e-48ac-a32b-f0c01c2836a8"
timestamp="2014-08-08T15:50:10.983464+00:00"
xsi:type='ttp:TTPType' version="1.2">
<ttp:Victim_Targeting>
<ttp:identity id="example:identity-ddfe7140-2ba4-48e4-b19a-df069432103b">
<stixCommon:name>Branistan Peoples Party</stixCommon:name>
</ttp:identity>
</ttp:Victim_Targeting>
</stixCommon:TTP>
</campaign:Related_TTP>
</campaign:Related_TTPs>
<campaign:Attribution>
<campaign:Attributed_Threat_Actor>
<stixCommon:Threat_Actor idref="example:threatactor-56f3f0db-b5d5-431c-ae56-c18f02caf500"/>
</campaign:Attributed_Threat_Actor>
</campaign:Attribution>
<campaign:Information_Source>
<stixCommon:Identity id="example:identity-f690c992-8e7d-4b9a-9303-3312616c0220">
<stixCommon:name>The MITRE Corporation - DHS Support Team</stixCommon:name>
<stixCommon:Role xsi:type="stixVocabs:InformationSourceRoleVocab-1.0">Initial Author</stixCommon:Role>
</campaign:Information_Source>
</stix:Campaign>
STIX 2.0 in JSON
{
"type": "identity",
"id": "identity--f690c992-8e7d-4b9a-9303-3312616c0220",
"created": "2016-08-08T15:50:10.983Z",
"modified": "2016-08-08T15:50:10.983Z",
"name": "The MITRE Corporation - DHS Support Team",
"identity_class": "organization"
}
{
"type": "identity",
"id": "identity--ddfe7140-2ba4-48e4-b19a-df069432103b",
"created_by_ref": "identity--f690c992-8e7d-4b9a-9303-3312616c0220",
"created": "2016-08-08T15:50:10.983Z",
"modified": "2016-08-08T15:50:10.983Z",
"name": "Branistan Peoples Party",
"identity_class": "organization"
}
{
"type": "campaign",
"id": "campaign--e5268b6e-4931-42f1-b379-87f48eb41b1e",
"created_by_ref": "identity--f690c992-8e7d-4b9a-9303-3312616c0220",
"created": "2016-08-08T15:50:10.983Z",
"modified": "2016-08-08T15:50:10.983Z",
"name": "Operation Bran Flakes",
"description": "A concerted effort to insert false information into the BPP's web pages",
"aliases": ["OBF"],
"first_seen": "2016-01-08T12:50:40.123Z",
"objective": "Hack www.bpp.bn"
}
See Threat Actor for the Threat Actor object.
Course of Action¶
In STIX 2.0 the course-of-action
object is defined as a stub. This means that in STIX
2.0 this object type is pretty “bare-bones”, not containing most of the
properties that were found in STIX 1.x. The property action
is
reserved, but not defined in STIX 2.0.
STIX 1.x Properties Mapped Directly to STIX 2.0 Properties
none
STIX 1.x Properties Translated to STIX 2.0 Properties
none
STIX 1.x Properties Mapped Using STIX 2.0 Relationships
STIX 1.x property | STIX 2.0 relationship type |
---|---|
Related_COAs |
related-to (when not used for versioning) |
STIX 1.x Properties Recorded in the STIX 2.0 Description Property
Stage
Objective
Impact
Cost
Efficacy
STIX 1.x Properties Not Mapped
Parameter_Observables
Structured_COA
Action
An Example
STIX 1.x in XML
<stix:Course_Of_Action id="example:coa-495c9b28-b5d8-11e3-b7bb-000c29789db9" xsi:type='coa:CourseOfActionType' version="1.2">
<coa:Title>Block traffic to PIVY C2 Server (10.10.10.10)</coa:Title>
<coa:Stage xsi:type="stixVocabs:COAStageVocab-1.0">Response</coa:Stage>
<coa:Type xsi:type="stixVocabs:CourseOfActionTypeVocab-1.0">Perimeter Blocking</coa:Type>
<coa:Objective>
<coa:Description>Block communication between the PIVY agents and the C2 Server</coa:Description>
<coa:Applicability_Confidence>
<stixCommon:Value xsi:type="stixVocabs:HighMediumLowVocab-1.0">High</stixCommon:Value>
</coa:Applicability_Confidence>
</coa:Objective>
<coa:Parameter_Observables cybox_major_version="2" cybox_minor_version="1" cybox_update_version="0">
<cybox:Observable id="example:Observable-356e3258-0979-48f6-9bcf-6823eecf9a7d">
<cybox:Object id="example:Address-df3c710c-f05c-4edb-a753-de4862048950">
<cybox:Properties xsi:type="AddressObj:AddressObjectType" category="ipv4-addr">
<AddressObj:Address_Value>10.10.10.10</AddressObj:Address_Value>
</cybox:Properties>
</cybox:Object>
</cybox:Observable>
</coa:Parameter_Observables>
<coa:Impact>
<stixCommon:Value xsi:type="stixVocabs:HighMediumLowVocab-1.0">Low</stixCommon:Value>
<stixCommon:Description>This IP address is not used for legitimate hosting so there should be no operational impact.</stixCommon:Description>
</coa:Impact>
<coa:Cost>
<stixCommon:Value xsi:type="stixVocabs:HighMediumLowVocab-1.0">Low</stixCommon:Value>
</coa:Cost>
<coa:Efficacy>
<stixCommon:Value xsi:type="stixVocabs:HighMediumLowVocab-1.0">High</stixCommon:Value>
</coa:Efficacy>
</stix:Course_Of_Action>
STIX 2.0 in JSON
{
"id": "bundle--495c4c04-b5d8-11e3-b7bb-000c29789db9",
"objects": [
{
"created": "2017-01-27T13:49:41.298Z",
"description": "\n\nSTAGE:\n\tResponse\n\n
OBJECTIVE: Block communication between the PIVY agents and the C2 Server\n\n
CONFIDENCE: High\n\n
IMPACT:Low, This IP address is not used for legitimate hosting so there should be no operational impact.\n\n
COST:Low\n\n
EFFICACY:High",
"id": "course-of-action--495c9b28-b5d8-11e3-b7bb-000c29789db9",
"labels": [
"perimeter-blocking"
],
"modified": "2017-01-27T13:49:41.298Z",
"name": "Block traffic to PIVY C2 Server (10.10.10.10)",
"type": "course-of-action"
}
],
"spec_version": "2.0",
"type": "bundle"
}
Indicator¶
STIX 1.x Composite Indicator Expressions and CybOX 2.x Composite Observable Expressions allow a level of flexibility not present in STIX 2.0 patterns. These composite expressions can frequently have ambiguous interpretations, so STIX 2.0 Indicators created by the stix2-elevator from STIX 1.x Indicators containing composite expressions should be inspected to ensure the STIX 2.0 Indicator has the intended meaning.
STIX 1.x Properties Mapped Directly to STIX 2.0 Properties
STIX 1.x property | STIX 2.0 property |
---|---|
Valid_Time_Position |
valid_from , valid_until |
STIX 1.x Properties Translated to STIX 2.0 Properties
STIX 1.x property | STIX 2.0 property |
---|---|
Alternative_ID |
external_references |
Kill_Chain_Phases |
kill_chain_phases |
IndicatorExpression |
pattern |
Producer |
created_by_ref |
STIX 1.x Properties Mapped Using STIX 2.0 Relationships
STIX 1.x property | STIX 2.0 relationship type |
---|---|
Indicated_TTP |
detects |
Suggested_COAs |
related-to |
Related_Indicators |
related-to (when not used for versioning) |
Related_Campaigns |
indicates |
STIX 1.x Properties Recorded in the STIX 2.0 Description Property
none
STIX 1.x Properties Not Mapped
negate
Test_Mechanisms
Likely_Impact
An Example
STIX 1.x in XML
<stix:Indicator id="example:Indicator-d81f86b9-975b-bc0b-775e-810c5ad45a4f"
xsi:type='indicator:IndicatorType'>
<indicator:Title>Malicious site hosting downloader</indicator:Title>
<indicator:Type xsi:type="stixVocabs:IndicatorTypeVocab-1.0">URL Watchlist</indicator:Type>
<indicator:Observable id="example:Observable-ee59c28e-d922-480e-9b7b-a79502696505">
<cybox:Object id="example:URI-b13ae3fc-80af-49c2-9de9-f713abc070ba">
<cybox:Properties xsi:type="URIObj:URIObjectType" type="URL">
<URIObj:Value condition="Equals">http://x4z9arb.cn/4712</URIObj:Value>
</cybox:Properties>
</cybox:Object>
</indicator:Observable>
</stix:Indicator>
STIX 2.0 in JSON
{
"created": "2017-01-27T13:49:53.935Z",
"id": "indicator--d81f86b9-975b-bc0b-775e-810c5ad45a4f",
"labels": [
"url-watchlist"
],
"modified": "2017-01-27T13:49:53.935Z",
"name": "Malicious site hosting downloader",
"pattern": "[url:value = 'http://x4z9arb.cn/4712']",
"type": "indicator",
"valid_from": "2017-01-27T13:49:53.935382Z"
}
Sightings
In STIX 1.x sightings were a property of IndicatorType. In STIX 2.0, sightings are a top-level STIX relationship object. Because they represent the relationship (match) of an indicator pattern to observed data (or other object), they are more naturally represented as a STIX 2.0 relationship.
For example, suppose the above indicator pattern was matched against an actual cyber observable (“observed-data–b67d30ff-02ac-498a-92f9-32f845f448cf”), because a victim (whose identity is represented by “identity–b67d30ff-02ac-498a-92f9-32f845f448ff”) observed that URL.
The STIX 2.0 sighting would be:
{
"type": "sighting",
"id": "sighting--ee20065d-2555-424f-ad9e-0f8428623c75",
"created_by_ref": "identity--f431f809-377b-45e0-aa1c-6a4751cae5ff",
"created": "2016-04-06T20:08:31.000Z",
"modified": "2016-04-06T20:08:31.000Z",
"first_seen": "2015-12-21T19:00:00Z",
"last_seen": "2015-12-21T19:00:00Z",
"count": 50,
"sighting_of_ref": "indicator--d81f86b9-975b-bc0b-775e-810c5ad45a4f",
"observed_data_refs": ["observed-data--b67d30ff-02ac-498a-92f9-32f845f448cf"],
"where_sighted_refs": ["identity--b67d30ff-02ac-498a-92f9-32f845f448ff"]
}
Malware¶
The Malware object in STIX 2.0 is a stub. STIX 2.0 does not support the inclusion of MAEC content. The main properties of malware in STIX 2.0 are not much different than the defined ones in 1.x, however, because of the lack of the ability to include the MAEC content fewer details of malware are representable in STIX 2.0.
Malware is not a top-level object in STIX 1.x, but a property of a TTP
.
The name
property of the STIX 1.x
Malware object is the preferred property to use to populated the name
property in the STIX 2.0 object, although if
missing, the title
property can be used.
STIX 1.x Properties Mapped Directly to STIX 2.0 Properties
none
STIX 1.x Properties Translated to STIX 2.0 Properties
STIX 1.x property | STIX 2.0 property |
---|---|
ttp:Kill_Chain_Phases |
kill_chain_phases |
STIX 1.x Properties Mapped Using STIX 2.0 Relationships
STIX 1.x property | STIX 2.0 relationship type |
---|---|
ttp:Related_TTPs |
variant-of (malware), related-to (when not used for versioning), uses (tool) |
ttp:Exploit_Targets |
targets (vulnerability, only) |
ttp:Victim_Targeting |
targets |
STIX 1.x Properties Recorded in the STIX 2.0 Description Property
ttp:Intended_Effect
STIX 1.x Properties Not Mapped
ttp:Kill_Chains
- any MAEC content
An Example
STIX 1.x in XML
<stix:TTP id="example:ttp-e610a4f1-9676-eab3-bcc6-b2768d58281a"
xsi:type='ttp:TTPType'
timestamp="2014-05-08T09:00:00.000000Z">
<ttp:Title>Poison Ivy</ttp:Title>
<ttp:Behavior>
<ttp:Malware>
<ttp:Malware_Instance id="example:malware-fdd60b30-b67c-11e3-b0b9-f01faf20d111">
<ttp:Type xsi:type="stixVocabs:MalwareTypeVocab-1.0">Remote Access Trojan</ttp:Type>
<ttp:Name>Poison Ivy</ttp:Name>
</ttp:Malware_Instance>
</ttp:Malware>
</ttp:Behavior>
</stix:TTP>
STIX 2.0 in JSON
{
"created": "2017-01-27T13:49:53.997Z",
"description": "\n\nTITLE:\n\tPoison Ivy",
"id": "malware--fdd60b30-b67c-11e3-b0b9-f01faf20d111",
"labels": [
"remote-access-trojan"
],
"modified": "2017-01-27T13:49:53.997Z",
"name": "Poison Ivy",
"type": "malware"
}
Observed Data¶
The Observed Data object in STIX 2.0 corresponds to the Observable
object in CybOX 2.x. Each Observed Data objects contain one or more
related cyber observable objects.
STIX 2.0 adds two properties: first_observed
and last_observed
.
These properties are related to the number_observed
property, because it is possible for
Observed Data to indicate that either one, or multiple instances of the same cyber observable occurred.
If the number_observed
property is 1, then the first_observed
and last_observed
properties
contain the same timestamp, otherwise they are the timestamp of the first and last times that cyber observable occurred.
The sighting_count
property of STIX 1.x may seem to be the same concept as number_observed
property,
but because STIX 2.0 has made explicit the difference between sightings and observed data,
this is not the case. See the STIX 2.0 specification for more details.
The sightings count is captured on the Sighting SRO.
STIX 1.x Properties Mapped Directly to STIX 2.0 Properties
STIX 1.x property | STIX 2.0 property |
---|---|
sighting_count |
not to be confused with number_observed |
Keywords |
labels |
**STIX 1.x Properties Translated to STIX 2.0 Properties**
STIX 1.x property | STIX 2.0 property |
---|---|
Object |
objects |
STIX 1.x Properties Mapped Using STIX 2.0 Relationships
none
STIX 1.x Properties Recorded in the STIX 2.0 Description Property
none
STIX 1.x Properties Not Mapped
negate
Event
Title
Description
Pattern_Fidelity
Observable_Source
An Example
STIX 1.x in XML
<cybox:Observable id="example:observable-c8c32b6e-2ea8-51c4-6446-7f5218072f27">
<cybox:Object id="example:object-d7fcce87-0e98-4537-81bf-1e7ca9ad3734">
<cybox:Properties xsi:type="FileObj:FileObjectType">
<FileObj:File_Name>iprip32.dll</FileObj:File_Name>
<FileObj:File_Path>/usr/local</FileObj:File_Path>
</cybox:Properties>
</cybox:Object>
</cybox:Observable>
STIX 2.0 in JSON
{
"created": "2017-01-27T13:49:41.345Z",
"first_observed": "2017-01-27T13:49:41.345Z",
"id": "observed-data--c8c32b6e-2ea8-51c4-6446-7f5218072f27",
"last_observed": "2017-01-27T13:49:41.345Z",
"modified": "2017-01-27T13:49:41.345Z",
"number_observed": 1,
"objects": {
"0": {
"file_name": "iprip32.dll",
"parent_directory_ref": "1",
"type": "file"
},
"1": {
"path": "/usr/local",
"type": "directory"
}
},
"type": "observed-data"
}
In STIX 2.0 cyber observables are only used within observed-data
objects to
represent something that has actually been seen. In STIX 1.x if an Observable
is contained in an Indicator
, it is instead
expressing a pattern to match against observed data.
The pattern expression to match the example cyber observable, when it is located in an indicator object, would be:
[(file:file_name = 'iprip32.dll' AND file:parent_directory_ref.path = '/usr/local')]
Report¶
The Report object in STIX 2.0 does not contain objects, but only object references
to STIX objects that are specified elsewhere (the location of the actual
objects may not be contained in the same bundle that contains the report
object).
In STIX 2.0, properties that were associated with the report
header in STIX 1.x are located in the report
object itself. The
labels
property contains vocabulary literals similar to the ones
contain in the Intent
property in STIX 1.x.
The published
property is required in STIX 2.0, so the timestamp of the STIX 1.0 Report is used.
STIX 1.x Properties Mapped Directly to STIX 2.0 Properties
none
STIX 1.x Properties Translated to STIX 2.0 Properties
STIX 1.x property | STIX 2.0 property |
---|---|
Observables |
object_refs |
Indicators |
object_refs |
TTPs |
object_refs |
Exploit_Targets |
object_refs |
Courses_Of_Action |
object_refs |
Campaigns |
object_refs |
Threat_Actors |
object_refs |
Report:Header.Intent |
labels |
**STIX 1.x Properties Mapped Using STIX 2.0 Relationships**
STIX 1.x property | STIX 2.0 relationship type |
---|---|
Related_Reports |
related-to (when not used for versioning) |
An Example
STIX 1.x in XML
<stix:Report timestamp="2015-05-07T14:22:14.760467+00:00"
id="example:Report-ab11f431-4b3b-457c-835f-59920625fe65"
xsi:type='report:ReportType' version="1.0">
<report:Header>
<report:Title>Report on Adversary Alpha's Campaign against the Industrial Control Sector</report:Title>
<report:Intent xsi:type="stixVocabs:ReportIntentVocab-1.0">Campaign Characterization</report:Intent>
<report:Description>Adversary Alpha has a campaign against the ICS sector!</report:Description>
</report:Header>
<report:Campaigns>
<report:Campaign idref="example:campaign-1855cb8a-d96c-4859-a450-abb1e7c061f2" xsi:type='campaign:CampaignType'/>
</report:Campaigns>
</stix:Report>
STIX 2.0 in JSON
{
"created": "2015-05-07T14:22:14.760Z",
"created_by_ref": "identity--c1b58a86-e037-4069-814d-dd0bc75539e3",
"description": "Adversary Alpha has a campaign against the ICS sector!\n\nINTENT:\nCampaign Characterization",
"id": "report--ab11f431-4b3b-457c-835f-59920625fe65",
"labels": [
"campaign-characterization"
],
"modified": "2015-05-07T14:22:14.760Z",
"name": "Report on Adversary Alpha's Campaign against the Industrial Control Sector",
"object_refs": [
"campaign--1855cb8a-d96c-4859-a450-abb1e7c061f2"
],
"type": "report"
}
Threat Actor¶
STIX 1.x Properties Mapped Directly to STIX 2.0 Properties
STIX 1.x property | STIX 2.0 property |
---|---|
Intended_Effects |
goals |
STIX 1.x Properties Translated to STIX 2.0 Properties
STIX 1.x property | STIX 2.0 property |
---|---|
Motivation |
primary_motivation , secondary_motivations , personal_motivations |
Sophistication |
sophistication |
**STIX 1.x Properties Mapped Using STIX 2.0 Relationships**
STIX 1.x property | STIX 2.0 relationship type |
---|---|
Identity |
attributed-to |
Observed_TTPs |
uses |
Associated_Campaigns |
attributed-to (reverse) |
Associated_Actors |
related-to (when not used for versioning) |
STIX 1.x Properties Recorded in the STIX 2.0 Description Property
Intended_Effect
Planning_And_Operational_Support
STIX 1.x Properties Not Mapped
none
An Example
STIX 1.x in XML
<stix:Threat_Actor id="example:threatactor-56f3f0db-b5d5-431c-ae56-c18f02caf500"
xsi:type='ta:ThreatActorType'
timestamp="2016-08-08T15:50:10.983Z"
version="1.2">
<ta:Title>Fake BPP (Branistan Peoples Party)</ta:Title>
<ta:Identity id="example:Identity-8c6af861-7b20-41ef-9b59-6344fd872a8f">
<stixCommon:Name>Franistan Intelligence</stixCommon:Name>
</ta:Identity>
<ta:Type>
<stixCommon:Value xsi:type="stixVocabs:ThreatActorTypeVocab-1.0">State Actor / Agency</stixCommon:Value>
</ta:Type>
<ta:Intended_Effect>Influence the election in Branistan</ta:Intended_Effect>
<ta:Motivation>
<stixCommon:Value xsi:type="stixVocabs:MotivationVocab-1.1">Political</stixCommon:Value>
</ta:Motivation>
<ta:Motivation>
<stixCommon:Value xsi:type="stixVocabs:MotivationVocab-1.1">Ideological</stixCommon:Value>
</ta:Motivation>
<ta:Motivation>
<stixCommon:Value>Organizational Gain</stixCommon:Value>
</ta:Motivation>
<ta:Sophistication>
<stixCommon:Value>Strategic</stixCommon:Value>
</ta:Sophistication>
</stix:Threat_Actor>
STIX 2.0 in JSON
{
"type": "threat-actor",
"id": "threat-actor--56f3f0db-b5d5-431c-ae56-c18f02caf500",
"created_by_ref": "identity--f690c992-8e7d-4b9a-9303-3312616c0220",
"created": "2016-08-08T15:50:10.983Z",
"modified": "2016-08-08T15:50:10.983Z",
"labels": ["nation-state"],
"goals": ["Influence the election in Branistan"],
"primary_motivation": "political",
"secondary_motivations": ["ideology", "organizational-gain"],
"name": "Fake BPP (Branistan Peoples Party)",
"sophistication": "strategic"
}
{
"type": "identity",
"id": "identity--8c6af861-7b20-41ef-9b59-6344fd872a8f",
"created_by_ref": "identity--f690c992-8e7d-4b9a-9303-3312616c0220",
"created": "2016-08-08T15:50:10.983Z",
"modified": "2016-08-08T15:50:10.983Z",
"name": "Franistan Intelligence",
"identity_class": "organization"
}
{
"type": "relationship",
"id": "relationship--5b271699-d2ad-468c-903d-304ad7a17d71",
"created": "2016-08-08T15:50:10.983Z",
"modified": "2016-08-08T15:50:10.983Z",
"relationship_type": "attributed-to",
"source_ref": "threat-actor--56f3f0db-b5d5-431c-ae56-c18f02caf500",
"target_ref": "identity--8c6af861-7b20-41ef-9b59-6344fd872a8f"
}
Tool¶
STIX 1.x Properties Mapped Directly to STIX 2.0 Properties
STIX 1.x property | STIX 2.0 property |
---|---|
Name (from CybOX) |
name |
Type (from CybOX) |
labels |
Description (from CybOX) |
description |
Version (from CybOX) |
tool_version |
**STIX 1.x Properties Translated to STIX 2.0 Properties**
STIX 1.x property | STIX 2.0 property |
---|---|
ttp:Kill_Chain_Phases |
kill_chain_phases |
References (from CybOX) |
external_references |
**STIX 1.x Properties Mapped Using STIX 2.0 Relationships**
STIX 1.x property | STIX 2.0 relationship type | ||
---|---|---|
ttp:Related_TTPs | uses (attack-pattern) (reverse), related-to (when not used for versioning), targets (identity) |
STIX 1.x Properties Recorded in the STIX 2.0 Description Property
ttp:Intended_Effect
STIX 1.x Properties Not Mapped
Compensation_Model
(from CybOX)Errors
(from CybOX)Execution_Environment
(from CybOX)ttp:Exploit_Targets
ttp:Kill_Chains
Metadata
(from CybOX)Service_Pack
(from CybOX)Tool_Configuration
(from CybOX)Tool_Hashes
(from CybOX)Tool_Specific_Data
(from CybOX)Vendor
(from CybOX)ttp:Victim_Targeting
An Example
STIX 1.x in XML
<stix:TTP id=example:tool--8e2e2d2b-17d4-4cbf-938f-98ee46b3cd3f
timestamp="2016-04-06T20:03:48.000Z">
<ttp:Resources>
<ttp:Tools>
<ttp:Tool>
<cyboxCommon:Name>VNCConnect</cyboxCommon:Name>
<cyboxCommon:Type>remote-access</cyboxCommon:Name>
<cyboxCommon:Vendor>RealVNC Ltd</cyboxCommon:Vendor>
<cyboxCommon:Version>6.03</cyboxCommon:Version>
</ttp:Tool>
</ttp:Tools>
</ttp:Resources>
</stix:ttp>
STIX 2.0 in JSON
{
"type": "tool",
"id": "tool--8e2e2d2b-17d4-4cbf-938f-98ee46b3cd3f",
"created": "2016-04-06T20:03:48.000Z",
"modified": "2016-04-06T20:03:48.000Z",
"labels": [ "remote-access"],
"version": "6.03",
"name": "VNCConnect"
}
Vulnerability¶
STIX 1.x Properties Mapped Directly to STIX 2.0 Properties
none
STIX 1.x Properties Translated to STIX 2.0 Properties
STIX 1.x property | STIX 2.0 mapping |
---|---|
CVE_ID |
external_references |
OSVDB_ID |
external_references |
References |
external_references |
STIX 1.x Properties Mapped Using STIX 2.0 Relationships
STIX 1.x property | STIX 2.0 relationship type |
---|---|
et:Potential_COAs |
mitigates |
et:Related_Exploit_Targets |
related-to (when not used for versioning) |
STIX 1.x Properties Recorded in the STIX 2.0 Description Property
none
STIX 1.x Properties Not Mapped
is_known
is_publicly_acknowledged
CVSS_Score
Discovered_DateTime
Published_DateTime
Affected_Software
Source
An Example
STIX 1.x in XML
<stix:Exploit_Targets>
<stixCommon:Exploit_Target id="example:et-e77c1e36-5b43-4c5c-b8cb-7b36035f2b90" timestamp="2014-06-20T15:16:56.986650+00:00" xsi:type='et:ExploitTargetType' version="1.2">
<et:Title>Heartbleed</et:Title>
<et:Vulnerability>
<et:CVE_ID>CVE-2013-3893</et:CVE_ID>
</et:Vulnerability>
</stixCommon:Exploit_Target>
</stix:Exploit_Targets>
STIX 2.0 in JSON
{
"created": "2014-06-20T15:16:56.986Z",
"external_references": [
{
"external_id": "CVE-2013-3893",
"source_name": "cve"
}
],
"id": "vulnerability--e77c1e36-5b43-4c5c-b8cb-7b36035f2b90",
"modified": "2017-01-27T13:49:54.310Z",
"name": "Heartbleed",
"type": "vulnerability"
}